Stanlay Material & Coating Thickness Gauges : CMX

Material & Coating Thickness Gauges : CMX

The CMX is an advanced thickness gauge that provides measure both material & coating thickness based on 100 MHz DSP platform using FPGA technology providing the highest capability.

The CMX is one of the most advanced thickness gauges, provides the best combination power, performance & perfection.

The CMX has an advanced software menu functionality providing automatic probe recognition & probe zero multiple thickness measurement options P-E mode (coating off), PECT (coating on), PETP (Temperature Comperation), E-E mode (Measure Through Paint), CT (coating only) at the touch of a button, pre fed material velocities to perform faster thickness measurements, B scan display option for cross section & high speed scanning.

CMI 95M Features

Specifications

Measure material thickness.
Measure coating thickness.
Detects pits & flaws in a single mode (PECT).
B Scan Display option for viewing material cross section.
Multimode feature for measuring material thickness through/eliminate paint thickness of material.
Measure thickness of material with or without paint or just measure coating thickness.
Adjust to material types by menu driven user selection of prefed material options.
Automatic probe recognition & temp compensation.
Auto Probe zero.
No need for manual probe zero.
High speed scan of 50 readings per second.
Audio/Visual Hi/lo Alarm setup option.

Measurement Range Specification :	Measurement Modes	Range :
Coating Off	Pulse-Echo (P-E)	0.63 to 508mm
Coating On	Pulse-Echo Coating (PECT)	0.63 to 508mm(Material)
		0.01 to 2.54mm(Coating)
Temp Comp	Pulse-Echo Temp Comp (PETP)	0.63 to 508mm
Thru-Paint	Echo-Echo (E-E)	1.27 to 102mm
Thru-Paint Verify	Echo-Echo Verify (E-EV)	1.27 to 25.4mm
Coating Only	Coating (CT)	0.0127 to 2.54mm
Coating Only	Coating (CT)	0.0127 to 2.54mm
Pulser	Dual square wave pulsers.	---
Receiver	Dual receivers - manual or AGC gain control with 110dB range (Limited).	---
Resolution	0.01mm	---
Velocity Range	1250 to 13995 m/s	---
Transducer :	Dual element (1 to 10 MHz), Locking quick disconnect "00" Lemo connectors. 4 foot cable.	---
Data Output :	Bi-directional RS232 serial port. Windows® PC interface software.	---
Display :	1/8 in. VGA grayscale display (240 x 160 pixels). Viewable area 62 x 45.7mm. (On/off/auto).	---
Case :	Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).	---
Keypad :	Membrane switch with twelve tactile keys.	---
Power Source :	Three 1.5V alkaline or 1.2V NiCad AA cells. Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included). Auto power off if idle 5 min. Battery status icon.	---
Operating Temperature :	-10° to 60°C	---
Size :	63.5 x 165 x 31.5mm	---
Weight :	382.75g (with batteries).	---
Item Code :	ST-CMX	---

Product by Type

Material & Coating Thickness Gauges

CMX

GO TO TOP