MX5 DL Digital Ultrasonic Material Thickness Gauge

How To Choose An Ultrasonic Thickness Gauge -Part II

The decision on whether you need to measure : 1. Thickness of sheet metal 2. Evaluate the onset of corrosion in metal fabricated structures 3. Thickness of small diameter pipes such as boiler tubes, automotive pipes etc amongst others, will decide which thickness gauge instrument you should purchase to satisfy the application. A thickness gauge is an investment in quality production of components, to test quality of product purchased and finally to ensure a higher lifetime of asset by identifying corrosion. Purchasing a world class quality instrument such as Dakota ultrasonic thickness gauge ensures that your teams are utilizing product which will provide consistency and repeatability in measurements ensuring that the process of quality assurance or quality testing can be inducted into your organization as a process and not as a daunting task. Many a times questions are asked give us an ultrasonic thickness gauge instrument which is easy to use , will provide accurate readings and can withstand the test of time in adverse conditions such as oil, heat etc. however, at the same time the next point addressed is that it should be the lowest cost instrument. As mentioned above, purchase of a thickness gauge should be considered an investment that provides ...

How To Choose A Material Thickness Gauge - Part I

Thickness gauges are utilized where a micrometer or vernier caliper cannot be utilized – for measuring thickness of large sheets of metal or other substrates which can otherwise not be measured using the above devices. A thickness gauge works on the principle of ultrasonics, i.e a signal is sent into the substrate through the transmitter  of an ultrasonic transducer which when received allows the thickness of the substrate to be measured. While all this sounds so simple, should all ultrasonic thickness gauges not be the same? Which leads to the questions – 1.  what is the type of substrate under test ? egg, steel, aluminum, iron, titanium, glass etc.2.  What are the conditions in which the thickness gauge will be used, will there be dust, oil, water ?3.  Is it a simple sheet of material or a final product ?4. How thin or thick is the product or material  ?5. Is it a tube , sheet or a block ?6. Are measurements required to be conducted on the same type of material each time or do the materials which are being tested keep on changing ?7. Does the material have a coating or not ?8. What is the accuracy required ?9. Is datalogging required ? amongst ...