CS4MXi Metal Detector operates on 17kHz frequency operating system developed by C.Scope.Fitted with the new generation signal processor, the 4MXi metal detector produces sharp and fast signal response with a lightning recovery time.
The CS4MXi features the option of three interchangeable heads to enable deeper detection, greater ground coverage and optimized performance for a variety of situations. Two of these are 2D elliptical and one concentric.
The CS4MXi is supplied as standard with the 8 x 11” elliptical search head, and has an Auto and Variable Ground Exclude Control for more precise ground elimination on mineralized sites.
Two Discriminate Controls for an instant comparison and analysis of signals. Discriminate 1 can be set low to eliminate iron and Discriminate 2 set high to still accept small hammered silver. There is also a Pinpoint Function which switches off the motion effect so that the search head can be brought to rest over the exact target location.
Weight | 1.45 kg including batteries |
Frequency | 17kHz |
Mode | Motion |
Power | 8 Alkaline 1.5 volt AA or rechargeable NiMH pack, Battery life approximately 50hours |
Interchangeble lightweight search heads |
8" (20cm) concentric - available as OPTION 8 X 11" (20X28cm) elliptical 2D - supplied as STANDARD
11 X 14" (28X34cm) elliptical 2D - available as OPTION |
Control box | In rugged pressure tested ABS moulding. Hipmount facility. |
Two part stem | With cam knurled nut locking and hole and pin alignment and lenght adjustment. GRP lower stem with ultra strong bolt to the search head |
CS4MXi Metal Detector operates on 17kHz frequency operating system developed by C.Scope.Fitted with the new generation signal processor, the 4MXi metal detector produces sharp and fast signal response with a lightning recovery time.
The CS4MXi features the option of three interchangeable heads to enable deeper detection, greater ground coverage and optimized performance for a variety of situations. Two of these are 2D elliptical and one concentric.
The CS4MXi is supplied as standard with the 8 x 11” elliptical search head, and has an Auto and Variable Ground Exclude Control for more precise ground elimination on mineralized sites.
Two Discriminate Controls for an instant comparison and analysis of signals. Discriminate 1 can be set low to eliminate iron and Discriminate 2 set high to still accept small hammered silver. There is also a Pinpoint Function which switches off the motion effect so that the search head can be brought to rest over the exact target location.
Weight | 1.45 kg including batteries |
Frequency | 17kHz |
Mode | Motion |
Power | 8 Alkaline 1.5 volt AA or rechargeable NiMH pack, Battery life approximately 50hours |
Interchangeble lightweight search heads |
8" (20cm) concentric - available as OPTION 8 X 11" (20X28cm) elliptical 2D - supplied as STANDARD
11 X 14" (28X34cm) elliptical 2D - available as OPTION |
Control box | In rugged pressure tested ABS moulding. Hipmount facility. |
Two part stem | With cam knurled nut locking and hole and pin alignment and lenght adjustment. GRP lower stem with ultra strong bolt to the search head |
Asian Contec ltd under its brand name Stanlay has been providing Non destructive testing solutions to the infrastructure, industry , research... Read More...
2018-04-17 02:27:41
The all new Stream C, The compact solution for real time 3D mapping of underground utilities – in association with IDS... Read More...
2018-04-17 02:27:57