36-600 NG
- Auger Boring Machine
The 36-600 NG is the next generation of auger boring machine that offers a highly productive Rack & Pinion system for rapidly pulling the boring machine back to it's starting position on the track without dogging or winching. No more handling of greasy frayed cable or wire rope knots. The Rack & Pinion system is ready to go full time just push the lever and you're there. Clean. Quick. Safe
• DEUTZ D914LO6 116 HP (86.5 kW) Tier III Diesel Engine
• 600,000 lbs. (272 Tonnes) of Maximum Thrust
• 5 Speed Transmission
• Maximum Output Torque: 107,257 ft-lbs. (145,540 Nm)
• Working Range: 12 to 42 inch (305 to 1,067 mm) Casing Diameter
• Increased ability to pull auger, steering rods, and push product
• Increased visibility to the master pusher
• Low Centerline and Wide Stance provide increased stability
• Hydraulically assisted clutch is easier and more comfortable to operate
• No Hook Rollers as the machine locks safely to the track
• Ergonomic operating button allows for feathering of the rotation and slow turn of the shaft for easy auger installation
• Emergency shutdown switch at the operator's station as well as an operator presence tethered switch.
• Vivid graphics guide safe and proper machine operation
• Update gauge system includes the improved engine tachometer, engine warning light, & hydraulic thrust pressure reading
• The Quik Split© frame design allows the machine to be separated into sections to accommodate lighter and fasters
• lifts into and out of the bore pit, and aids the operator in being able to facilitate better and safer machine positioning
• 600,000 lbs. (272 Tonnes) of Maximum Thrust
• 5 Speed Transmission
• Maximum Output Torque: 107,257 ft-lbs. (145,540 Nm)
• Working Range: 12 to 42 inch (305 to 1,067 mm) Casing Diameter
• Increased ability to pull auger, steering rods, and push product
• Increased visibility to the master pusher
• Low Centerline and Wide Stance provide increased stability
• Hydraulically assisted clutch is easier and more comfortable to operate
• No Hook Rollers as the machine locks safely to the track
• Ergonomic operating button allows for feathering of the rotation and slow turn of the shaft for easy auger installation
• Emergency shutdown switch at the operator's station as well as an operator presence tethered switch.
• Vivid graphics guide safe and proper machine operation
• Update gauge system includes the improved engine tachometer, engine warning light, & hydraulic thrust pressure reading
• The Quik Split© frame design allows the machine to be separated into sections to accommodate lighter and fasters
• lifts into and out of the bore pit, and aids the operator in being able to facilitate better and safer machine positioning
® 2009 STANLAY, All Rights Reserved
