CMX - Material & Coating Ultrasonic Thickness Gauge
The CMX is an advanced thickness gauge that provides functionality of both material & coating thickness measurement based on 100 MHz DSP platform using FPGA technology providing the highest capability.
• Measure material thickness.
• Measure coating thickness.
• Detects pits & flaws in a single mode (PECT).
• B Scan Display option for viewing material cross section.
• Multimode feature for measuring material thickness through/eliminate paint
thickness of material.
• Measure thickness of material with or without paint or just measure coating
thickness.
• Adjust to material types by menu driven user selection of prefed material options.
• Automatic probe recognition & temp compensation.
• Auto Probe zero.
• No need for manual probe zero.
• High speed scan of 50 readings per second.
• Audio/Visual Hi/lo Alarm setup option.
• Measure coating thickness.
• Detects pits & flaws in a single mode (PECT).
• B Scan Display option for viewing material cross section.
• Multimode feature for measuring material thickness through/eliminate paint
thickness of material.
• Measure thickness of material with or without paint or just measure coating
thickness.
• Adjust to material types by menu driven user selection of prefed material options.
• Automatic probe recognition & temp compensation.
• Auto Probe zero.
• No need for manual probe zero.
• High speed scan of 50 readings per second.
• Audio/Visual Hi/lo Alarm setup option.
Measurement range Specification:
Measurement Modes
Coating Off Pulse-Echo (P-E) 0.63 to 508mm
Coating On Pulse-Echo Coating (PECT) 0.63 to 508mm(Material)
0.01 to 2.54mm(Coating)
Temp Comp Pulse-Echo Temp Comp (PETP) 0.63 to 508mm
Thru-Paint Echo-Echo (E-E) 1.27 to 102mm
Thru-Paint Verify Echo-Echo Verify (E-EV) 1.27 to 25.4mm
Coating Only Coating (CT) 0.0127 to 2.54mm
Pulser Dual square wave pulsers.
Receiver Dual receivers - manual or AGC gain control with 110dB range (Limited).
Resolution: 0.01mm
Velocity Range: 1250 to 13995 m/s
Coating Off Pulse-Echo (P-E) 0.63 to 508mm
Coating On Pulse-Echo Coating (PECT) 0.63 to 508mm(Material)
0.01 to 2.54mm(Coating)
Temp Comp Pulse-Echo Temp Comp (PETP) 0.63 to 508mm
Thru-Paint Echo-Echo (E-E) 1.27 to 102mm
Thru-Paint Verify Echo-Echo Verify (E-EV) 1.27 to 25.4mm
Coating Only Coating (CT) 0.0127 to 2.54mm
Pulser Dual square wave pulsers.
Receiver Dual receivers - manual or AGC gain control with 110dB range (Limited).
Resolution: 0.01mm
Velocity Range: 1250 to 13995 m/s
Transducer
Dual element (1 to 10 MHz).
Locking quick disconnect “00” Lemo connectors. 4 foot cable.
Locking quick disconnect “00” Lemo connectors. 4 foot cable.
Data Output
Bi-directional RS232 serial port. Windows® PC interface software.
Display
1/8 in. VGA grayscale display (240 x 160 pixels). Viewable area
62 x 45.7mm. (On/off/auto).
Case
Extruded aluminum body with nickel-plated aluminum end caps
(gasket sealed).
Keypad
Membrane switch with twelve tactile keys
Power Source
Three 1.5V alkaline or 1.2V NiCad AA cells. Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included). Auto power off if idle 5 min. Battery status icon.
Operating Temperature
-10° to +60°C
Size
63.5 x 165 x 31.5mm
Weight
382.75g (with batteries).
• Up to 64 custom setups for specific
applications
• High Speed scan up to 50 readings per sec
• Built in differential mode for QC Inspection
• Automatic Gain Control (AGC) with 110db range
• Time Corrected Gain(TGC)
• Windows PC Software included
applications
• High Speed scan up to 50 readings per sec
• Built in differential mode for QC Inspection
• Automatic Gain Control (AGC) with 110db range
• Time Corrected Gain(TGC)
• Windows PC Software included
• Material Thickness
• Thickness through coating
• Coating Thickness
• Thickness through coating
• Coating Thickness
® 2009 STANLAY, All Rights Reserved
