MX3 - Material Thickness Gauge

MX3 - Material Thickness Gauge

The MX-3 is a professional ultrasonic thickness gauge providing extreme flexibility & accuracy to field calibrate to a variety of materials instantly for material thickness measurement.

• Two-Point Calibration option.
• Standard measurement mode for 4 readings per second.
• High speed scan mode for 16 readings per second.
• Readings are viewable on real time basis while scanning.
• Bar graph in LCD display indicates stability of reading.
• Backlit display.
• Probe zero function.

Measurement range Specification:

Measuring Range (Pulse-Echo Mode): 0.63 to 500 mm
Resolution: 0.01 mm
Velocity Range: 1250 to 10,000 meters/sec

Transducer

Dual element (transmit and receive).
1 to 10 MHz frequency range.
Locking quick disconnect Lemo connectors.4 foot cable.

Certification

Factory calibration traceable to national standards.

Display

4.5 Digit LCD with 0.5dgts numerals & backlight, measure in inches, inches/microsecond, mm, m/s

Case

Extruded aluminum body / nickel plated
Aluminum end caps
Resistant to impact and environmentally sealed.

Keypad

Sealed membrane that is resistant to both water and petroleum products.
6 tactile-feedback keys.

Power Source

Two 1.5V alkaline or 1.2V NiCad AA cells. Typically operates for 200 hours on alkaline and 130 hours on NiCad. Display flashes when battery is low. Unit turns off automatically if battery is too low to operate reliably.

Operating Temperature

-30° to +50°C

Size

63.5 x 114.3 x 31.5mm

Weight

283.5g

• Check moisture level in concrete before painting or application of any synthetic material
• Check moisture level in wood