Dynamic Seismic Monitoring

Dynamic Seismic Monitoring

Earthquake Monitoring System

The purpose of using a seismic dynamic monitoring system is to provide information & automated response of potential dangerousness of structures or buildings after a seismic event. In case of earthquakes, the system determines if the vibrations exceed critical thresholds set providing alarms in the form of light indicators & SMS/Email alert.


A Dynamic monitoring system comprises of Force Balance Accelerometers or Seismometers used with seismic recorders to measure

  • Displacement
  • Velocity
  • Acceleration


In structures or locations where dynamic monitoring is required including

  • Mines & Quarries
  • Dams
  • Important Buildings
  • Bridges,Flyovers,Chimneys etc
  • Rock Noise Monitoring


In case of daily microseidmic events, the Dynamic monitoring system allows an evaluation of the response of buildings monitored for specific critical points.

Click on Product for more information:

MAS24 Micro Seismic Recorder

MAS24 Micro Seismic Recorder high resolution integrated unit with 3 or 6 channel option.

Dymas 24 Master V Portable Seismic Recorder

Dymas 24 Master V multichannel portable seismic recorder for long term monitoring , ideal for both Microseismic & Vibrational studies.

Dymas 24 Alben Multichannel Seismic Recorder

The Dymas 24 Alben multichannel acquisition system for long term monitoring with setup ranges from 6 ,12 up to 48 channels .

Veloget Seismometer 1 Hz

The Veloget 1Hz seismometer is a velocity meter available in Triaxial(3D),Biaxial(2D) & Monoaxial(1D) configuration for vertical & horizontal applications.

Force Balance Accelerometers

The AFB Force balance accelerometers are high sensitivity low noise sensors available in ranges of +-0.25G to +-4G for seismic and low level- low frequency motion studies.

Click to Verify Human: